Removing a charger dock (To connect a replacement charger dock see below)

  1. Open case and remove tool bag
  2. Hold lid open
  3. Locate and remove six (6) screws only.
  4. Lift the charger dock up to release the hooks.
  5. Disconnect this white plug and remove charger dock.

 

 

 

Fitting a charger dock (To remove a charger dock see above)

  1. Open case and remove tool bag
  2. Hold lid open
  3. Connect this white plug on dock to matching plug on case.
     
  4. Lower the charger dock onto the case so these hooks hold it in place.   
  5. Fit and secure six (6) screws at these locations.