18V tools

Replace or repair cells in a PH01, PH02, PH03, PH04 or PH05
  You must only open or attempt repairs of CEL products entirely at your own risk. CEL cannot be held responsible for any damage to persons or property...
Thu, 31 Mar, 2016 at 12:08 PM
Recovering an extremely flat battery.
WARNING! If the battery has signs of leakage is misshapen, has been damaged by heat or physically damaged or becomes extremely hot while charging it should ...
Wed, 20 Aug, 2014 at 7:47 AM
18V POWER8workshop testing the internal power connector and safety switches
There are several safety devices on the POWER8workshop which will prevent the tools from running in some cases. These steps may help you to understand how t...
Thu, 18 Feb, 2016 at 11:16 AM
Checking the voltage of a POWERhandle
  In the image above is the top of a POWERhandle. The 2 red lines on the POWERhandle indicate the + and - connections which are used to charge the P...
Thu, 10 Mar, 2016 at 12:07 PM
Remove or connect charger dock on POWER8workshop
Removing a charger dock (To connect a replacement charger dock see below) Open case and remove tool bag Hold lid open Locate and remove six (6) screws ...
Tue, 14 Jul, 2020 at 1:41 PM
Please note that the mains power does not run the tools, there must be a charged battery locked into the main dock location. The mains power is able to char...
Tue, 3 Nov, 2020 at 4:23 PM
18V POWERhandle direction switch
Tue, 23 Feb, 2021 at 2:45 PM